3w Small watts COB residencial comercial lights LEDS 150 efficiency
- Non-silverized package for high reliability and strong weatherability
- ANSI 3SDCM
- Certified by LM-80 & EN62471
- High CRI, high efficiency
- With precise light control
The part number designation for TYF ML Series LED arrays is explained as follows:
* The color temperature is defined in accordance with ANSI C78.377-2015.*
Color Binning Information
Figure 1: Graph of Test Bins in xy Color Space (Pulsed Test Conditions, Tj = 25°C)
| Nominal CCT | Center Point | MAJOR AXIS (a , b) | Ellipse Rotation Angel,θ |
| X | Y | 2-Step | 3-Step | 5-Step |
| 2200K | 0.5018 | 0.4153 | (0.0048 , 0.0027) | (0.0072, 0.0041) | (0.0120, 0.0067) | 39.9 |
| 2500K | 0.4806 | 0.4141 | (0.0050, 0.0027) | (0.0076, 0.0041) | (0.0126, 0.0068) | 53.1 |
| 2700K | 0.4575 | 0.4101 | (0.0053, 0.0027) | (0.0080, 0.0041) | (0.0133, 0.0068) | 54.1 |
| 3000K | 0.4338 | 0.4030 | (0.0057, 0.0028) | (0.0086, 0.0042) | (0.0142, 0.0069) | 53.7 |
| 3500K | 0.4073 | 0.3917 | (0.0062, 0.0028) | (0.0093, 0.0041) | (0.0155, 0.0069) | 54.0 |
| 4000K | 0.3818 | 0.3797 | (0.0063, 0.0027) | (0.0093, 0.0042) | (0.0157, 0.0068) | 53.4 |
| 5000K | 0.3447 | 0.3553 | (0.0054, 0.0024) | (0.0081, 0.0035) | (0.0135, 0.0059) | 59.8 |
| 5700K | 0.3290 | 0.3417 | (0.0048, 0.0021) | (0.0072, 0.0032) | (0.0119, 0.0052) | 58.8 |
| 6500K | 0.3123 | 0.3282 | (0.0044, 0.0018) | (0.0066, 0.0027) | (0.0110, 0.0045) | 58.1 |
Table 39: Maximum Ratings
Notes for Table 39:
- Driven the arrays at higher currents however lumen maintenance may be reduced.
- Proper current derating must be observed to maintain junction temperature below the maximum
- Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤1ms per cycle and the duty cycle is ≤10%
- Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition. Maximum rating provided for reference only.
Notes: 1. All dimension tolerance is ±0.2mm unless otherwise noted. 2. Tc measurement point at cathode
RECOMMENDED SOLDERING CONDITION
For manual soldering. Please use lead-free soldering and the soldering shall be implemented using a soldering bit at a
temperature lower than 350C, and shall be finished within 3.5 seconds for one land. No external force shall be applied
to resin part while soldering is implemented. Next process of soldering should be carried out after the product has
return to ambient temperature. CAUTION: TEMPERATURE CONTROL
Product Packing and Labeling
Product Tags:
|
|
3w Small Watts Led Light Chips , 150 Efficiency Chip On Board Led Images
|
